DADCO POLYESTER (Waterproofing Membrane)

DADCO POLYESTER (Waterproofing Membrane)

Is an APP-modified bituminous Waterproofing membrane, reinforced with high-quality non-woven Polyester mat. It is manufactured from a high-performance membrane produced with APP MODIFIED bitumen compound, then coated onto a dimensionally stable POLYESTER mat reinforcement, and the surface on both sides with thermo-fusible plastic film.

Characteristics:

• · Excellent bonding to the surface.
• · Easy to apply.
• · Excellent resistance to salts and water-prone chemicals.
• · Accommodates structural movements.
• · Stability at high temperatures.
• · 10-year warranty for the product.

Uses:

DADCO POLYESTER membrane is ideal for a wide range of waterproofing applications such as: Roofs, basements, tunnels, car parks, wet areas (kitchens & bathrooms),

Application Tools required:

Measuring tape, marking string, gloves, goggles, gas torch, knife, trowel.

Application:

The concrete surface should be cleaned thoroughly of all contaminants, such as dust, traces, and oils. Then, apply DADCO PRIMER D-41 to the surface using a brush or roller, and allow it to dry to promote adhesion between the membrane and the surface. The rolls should be alignment correctly with an overlap of at least 10 cm from both sides. By using the gas torch, bond the sides of the roll by heating the overlap enough to obtain a high and excellent waterproofed surface.

General data:

• Roll length: 10 meters
• Roll width: 1 meter
• Roll thickness:4 mm
• Reinforcement: Polyester

Backing and storage:

• DADCO POLYESTER is produced in rolls of 1 × 10 meters. Special lengths are available upon request.
• The rolls are palletized and shrink-wrapped.
• The rolls should be kept vertically, and Pallets should not be stacked on top of each other.

Health and safety:

All safety measures should be taken during the application. Fire extinguishers should be available at the site. Workers should wear protective tools during the application.